Volumetric Pellet Feeders - PEF-II

Volumetric Pellet FeedersNo longer do you have to trade off performance for price on a Volumetric Pellet Feeder for your colorants or additives. Foremost's PEF-II volumetric feeders have all the features you want, the precision performance you need, at a price that's right -- and from $200 to $500 less than most other Volumetric Feeders.

Interchangeable augers and barrels. No matter what throughput you need, we have got a metering auger that's right for the job. Just swing away the motor and the auger slides out. Release a retainer and remove the mating barrel. And the unique, single end bearing design gives you the rigidity necessary for precise, repeatable shot volumes, cycle after cycle, or continuously.

Set up is simple and quick using the non-fouling sampling outlet provided for feed rate calibration. The .75 cu. ft. bin comes with sight glass and slide gate, and is clamp mounted for convenience. A rapid drain port is provided, too. And up to four feeders can be swing locked into place on one machine throat adapter. Standard variable speed 110 volt controls are remote mounted.

The PEF-II: we guarantee its everything we've claimed and more. Try it. If your not satisfied, we'll take it back, no questions asked. Send your purchase order and we'll ship your PEF-II from our stock the same day. Want more information? Click here for our Contact Information.


AUGER PART NUMBER AUGER SIZE BARREL THROUGHPUT IN GRAMS PER MINUTE LBS/HR
MAX
DIA PITCH CORE PART NO ID MIN  MAX 
Y-4605-41-1 1/2 5/16 1/4 Y-4605-45-2 3/4 2.80 29.50 3.90
Y-4605-41-2 1/2 1/2 1/4 Y-4605-45-2 3/4 6.40 54.40 7.20
Y-4605-41-3 5/8 5/16 3/8 Y-4605-45-3 7/8 3.60 34.00 4.50
Y-4605-41-4 5/8 1/2 3/8 Y-4605-45-3 7/8 10.80 65.80 8.70
Y-4605-41-5 3/4 5/16 1/2 Y-4605-45-4 1" 2.60 38.50 5.10
Y-4605-41-6 3/4 1/2 1/2 Y-4605-45-4 1" 11.80 93.00 12.30
Y-4505-41-7 1 1/2 1/2 Y-4605-45-5 1-3/8 33.60 261.70 34.60
Y-4605-41-8 1 1-1/2 5/16 Y-4605-45-5 1-3/8 106.00 762.50 100.90

Test Conditions

  • Material: Color Concentrate
  • Size: 1/8 Dia. x 1/8 Long
  • Weight: 40 lbs/Cu. Ft.
  • Shot Time: 30 Seconds
  • Timing Device: T.I. 510 Programmable Controller
  • 62 RPM

Conversion Factors

  • Ounces x 28.349 = Grams
  • Pounds x 453.59 = Grams
  • Pounds per Hour x 7.559 = Grams per Minute
  • Grams per Minute x .13229 = Pounds per Hour

Based on 62 RPM (output rpm max.)

Contact us today: - Tel: 973.227.0700



We accept the following major credit cards:

Plastic Process Equipment

 



Plastic Process Equipment

23 Spielman Road, Fairfield, New Jersey, USA, 07004-6155
Tel: 973.227.0700 ~ Fax: 973.227.7307 ~ Email: