Fluff Reclaim Crammer Feeders

Fluff Reclaim Crammer FeedersFor over sixty years, Foremost has been supplying quality equipment designed to meet the needs of the plastics industry. Foremost currently offers three types of fluff feeders, each designed for specific applications.

These include the standard model CFV-2 with Vector drive, the CCF cone in cone feeder and the LPF Low Profile type feeder.

These series of crammer feeders are force feeding devices that are designed to compact fluffy materials at the extruder screw to provide a uniform density and relatively consistent head pressure.

  EXTRUDER SIZE 1" TO 3" OVER 3" TO 6" OVER 6"  
Type Model Designation Model Range Comments:
Crammer Feeder CFV- CFV-1 CFV-2 CFV-3 True Crammer Feeder, constant feed/head pressure, automatically
tracks extruder speed, mixed material required (no proportioning
or blending)
Cone-In-Cone Fluff Feeder CCF- CCF-1 CCF-2 CCF-3 Pellet Fluff Proportioning, adds fluff to pellet flow stream, some
fluff compaction but no real
cramming action or extruder speed tracking (speed
following available as an
Low Profile Fluff Blender LPF- LPF-1 LPF-2 LPF-3 Same as CCF Models but low profile/low volume configuration

Our crammer feeders employ the use of a Flux Vector drive, a true torque device which enables the system to feed up to a 50% fluff/pellet blend with a consistent material density at the extruder throat. The benefits of this crammer feeder include true cramming action which provides relatively constant head pressure throughout the range of normal extruder needs.

Download Crammer Application Notes.

Download Crammer Feeder Data Sheet.

% 1X 2x 3x 4x 5x 6x
0.1 31.9 32.3 32.7 33.1 33.5 33.9
0.2 28.8 29.6 30.4 31.2 32 32.8
0.3 25.7 26.9 28.1 29.3 30.5 31.7
0.4 22.6 24.2 25.8 27.4 29 30.6
0.5 19.5 21.5 23.5 25.5 27.5 29.5
0.6 16.4 18.8 21.2 23.6 26 28.4
0.7 13.3 16.1 18.9 21.7 24.5 27.3
0.8 10.2 13.4 16.6 19.8 23 26.2

1. Table and graphs are based on a pellet bulk density of 35 lbs/cu ft and an uncompressed film fluff bulk density of 4 lbs/cu ft.

CFV-2C Fluff Feeders

CFV-2C Fluff Feeder with an optional belt
driven side mounted drive package.

For applications that do not require true cramming, we offer a Cone-in-Cone Fluff Feeder which blends fluff and virgin resin material at the machine throat. This compact machine and its low profile counterpart allow fluff to be reclaimed without the use of expensive fluff/pellet blending equipment, simplifying your process.

The last feeder is the LPF type feeder which is the same as the cone in cone except that it is smaller for mounting in tight places.

Model CCF


Model LPF


Blender CCF Blender CCF Blender LPF Blender LPF

Cone-in-Cone Fluff Feeder

Cone-in-Cone Low Profile Fluff Feeder

Contact us today: - Tel: 973.227.0700

We accept the following major credit cards:

Plastic Process Equipment


Plastic Process Equipment

23 Spielman Road, Fairfield, New Jersey, USA, 07004-6155
Tel: 973.227.0700 ~ Fax: 973.227.7307 ~ Email: