High Shear Film and Sheet Granulators - SHFG 1116, HSFG 1116, 1132, 1148, 1632

High Shear Film and Sheet Granulators Our High Shear Film and Sheet Granulators are suitable for a wide range of applications including grinding sheet, film, roll stock, edge trim, and slabs. Specific models are available for each type of granulating and all are offered with optional SQ sound attenuation for granulating at under 80 dBA. Without this treatment, utilizing our standard sound panels, a respectable 85 to 90 dBA range can still be achieved.

Unique design permits easy knife removal for off-the-machine resharpening without disassembling the rotor itself. This grinder has a hinged cabinet, which can be opened or removed without tools for total access when maintenance is required. The cutting chamber is accessible from front and rear chamber access doors for cleanout or knife adjustable from above the machine.

Standard Features

  • Feed: Center.
  • Hopper: Hand load.
  • Safety Switches: To prevent operation of granulator when hopper is open or if screen is exposed.
  • Airveying System: Integrated to granulator for continuous automatic unloading.
  • Controls: NEMA 12, 110 volt control panel with fused disconnect and all starters electrically interlocked.
  • Sound Treatment: Microsonic sound deadening treatment on the hopper and removable sound attenuated panels around the cutting chamber and motor.
Model SHSFG-1116 HSFG-1116 HSFG-1124 HSFG-1132 HSFG-1148 HSFG-1632
Cutting Diameter 11" 11" 11" 11" 11" 16"
Thoat Size 11" x 16" 11" x 16" 11" x 24" 11" x 32" 11" x 48" 16" x 32"
Knives (3) 15 1/2" High Shear Knives
(2) 16" Bed Knives
(8) 16" High Shear Knives
(2) 16"Bed Knives
(8) 24" High Shear Knives
(2) 24"Bed Knives
((16) 16" High Shear Knives
(4) 16"Bed Knives
(9) 16" High Shear Knives
(4) 24" Bed Knives
(16) 16" High Shear Knives
(4) 16" Bed Knives
Screen 1/4", 5/16", 3/8" or 1/2" standard with separate cradle (1/8", 3/16", 3/4" and 1" optional on most models)
Motor 20, 30 hp TEFC, 1800 RPM 20, 30 hp TEFC, 1800 RPM 30, 40 hp TEFC, 1800 RPM 40 hp TEFC, 1800 RPM 40 hp TEFC, 1800 RPM 50 hp TEFC, 1800 RPM
Electric NEMA 12 with switch disconnect

Option Features

  • Conveyor Feed Hoppers
  • Sheet feed hoppers
  • Roller feeders
  • Air cooling packages
  • Water cooling packages
  • Trim feed systems
  • SQ sound attenuation packages
  • Fabricated Sound enclosures

Spiral Cut Granulators SCG-1116 In A Sound Booth

HSFG-1116 Fed By a Conveyor

HSFG-1124 With Roller Feeder and Edge Trim Cage

HSFG-1132 Granulator SCG-1116 Grinder

HSFG-1132 Granulator With a Roller Feeder

HSFG-1116 With Sound Enclosure

SCG-1116 Grinder SCG-1116 Grinder

HSFG-1116 Low Base Design With Roller Feeder and Sound Cabinet

HSFG-1148 With Unroll Stand, Material Folder, and Roller Feeder

Model HSFG-1116V Venturi Granulator

The model HSFG-1116V venturi granulator utilizes one common high volume integrally mounted blower to pull continuous film edge trim into the grinder cutting chamber and to evacuate the reground material. Each machine is equipped with two 3"venturi pick-ups. All motor starters electronically interlocked and are housed in a NEMA 12 enclosure with a fused disconnect. The unit in the picture is mounted in our optional "SQ" sound enclosure.

SCG-1116 Grinder

Contact us today: - Tel: 973.227.0700

We accept the following major credit cards:

high shear granulators


high shear granulators

23 Spielman Road, Fairfield, New Jersey, USA, 07004-6155
Tel: 973.227.0700 ~ Fax: 973.227.7307 ~ Email: