MPULSE GF Bulk Goods Metal Detectors


Model Name M-Pulse GF 100 M-Pulse GF 120 M-Pulse GF 150 M-Pulse GF 200
Mechanical Details        
Installation height (include inlet flange) 400 [600] mm 490 [720] mm 550 [850] mm 790 [1200] mm
Width/Depth 318/450 mm 338/450 mm 400/502 mm 508/615 mm
Nominal width 100 mm 120 mm 150 mm 200 mm
Material of Installing frames Stainless steel
Material of reject device Stainless steel
Material of ring Aluminum/Stainless steel
Protection Tube Material (optional) Teflon, Polyethylene, POM [Ceramics optional]
Protection class of detector IP 65

Application Conditions
Material throughput depends on the properties of material and complete conveyor system <20000 I/h <28000 I/h <4.000 I/h <7.000 I/h
Max. drop speed of bulk material 100 - 4.000 mm/sec
Max. permissible bulk material temperature 80 °C
Max. permissible bulk material temperature -10°C... 50°C
Properties of the bulk material flowable

Sensitivity Adjustable Maximal (no product effect assumed)
At the center of detector [Ferrous/Fe/Ne/VA-bullet in mm app. 0.5/0.7/0.8 app. 0.7/0.9/1.0 app. 0.8/1.1/1.3 app. 1.2/1.6/1.8
Sensitivity is adjustable by LC display-multifunction panel
Mode of operation of evaluation electronics digital
Mode of operation of ring detector Transmitter - Receiver

Model Name M-Pulse GF 250 M-Pulse GF 300 M-Pulse GF 350 M-Pulse GF 400
Mechanical Details
Installation height (with reject flap) 935 [1395] mm 1100 [1605] mm 1265 [1935] mm 1350 mm
Width/Depth 685/800 mm 800/940 mm 880/1020 mm 950/1090 mm
Nominal width 250 mm 300 mm 350 mm 400 mm
Material of Installing frames Stainless steel
Material of reject device Stainless steel
Material of ring Aluminum/Stainless steel
Protection Tube Material (optional) Teflon, Polyethylene, POM [Ceramics optional]
Protection class of detector IP 65

Application Conditions
Material throughput depends on the properties of material and complete conveyor system <115000 I/h <165000 I/h <225000 I/h <290000 I/h
Max. drop height of the bulk material 100 - 4.000 mm/sec
Max. permissible temperature 80 °C
Max. permissible device temperature -10 °C...50 °C
Properties of the bulk material flowable

Sensitivity Adjustable Maximal (no product effect assumed)
At the center of detector [Ferrous/Fe/Ne/VA-bullet in app. 1.5/2.0/2.3 app. 1.9/2.4/3.0 app. 2.2/2.7/3.3 app. 2.4/2.9/3.6
Sensitivity is adjustable by LC display-multifunction panel
Mode of operation pc board digital
Mode of operation of ring detector Transmitter - Receiver
   

Operator display M-Pulse electronics

Ød Ød [mm] A B C D A [mm] B [mm] C [mm] D [mm]
4" 100 23.6" 15.8" 17.7" 12.5" 600 400 450 318
5" 120 28.4" 19.3" 17.7" 13.3" 720 490 450 338
6" 150 33.5" 21.7" 19.8" 15.8" 850 550 502 400
8" 200 47.2" 31.1" 24.2" 20" 1200 790 615 508
10" 250 54.9" 36.8" 31.5" 26" 1395 935 800 685
12" 300 6.3.2" 43.3" 37" 31.5" 1605 1100 940 800
14" 350 7.62" 49.8" 40.2" 34.7" 1935 1265 1020 880
16" 400 82.7" 53.2" 42.9" 37.4 2100 1350 1090 950

TYPICAL MATERIAL FLOW cu ft/hr TYPICAL MATERIAL FLOW APPROXIMATE SENSITIVITY Ø mm
FE AL SS
700 20000 0.5 0.7 0.8
1000 28000 0.7 0.9 1.0
1500 43000 0.8 1.1 1.3
2600 74000 1.2 1.6 1.8
4000 115000 1.5 2.0 2.3
5800 165000 1.9 2.4 3.0
7900 225000 2.2 2.7 3.3
10300 290000 2.4 2.9 3.6

Contact us today: - Tel: 973.227.0700


We accept the following major credit cards:

Plastic Process Equipment


Plastic Process Equipment

23 Spielman Road, Fairfield, New Jersey, USA, 07004-6155
Tel: 973.227.0700 ~ Fax: 973.227.7307 ~ Email: