M-Pulse GF Metal Separators

There are four M-Pulse GF digital metal separators with detector coil diameters ranging from 100, 135, 150 to 200 mm.

Description M-Pulse GF 100 M-Pulse GF 120 M-Pulse GF 150 M-Pulse GF 200
Mechanical Details
Installation height (include inlet flange) 400 [600] mm 490 [720] mm 550 [850] mm 790 [1200] mm
Width/Depth 318/450 mm 338/450 mm 400/502 mm 508/615 mm
Nominal width 100 mm 120 mm 150 mm 200 mm
Material of Installing frames Stainless steel
Material of reject device Stainless steel
Material of ring Stainless steel
Material of protection tube (optional) Teflon, Polyethylene, POM, Glas
Protection class of detector IP 65

Application Conditions
Material throughput depends on the properties of material and complete conveyor system <20000 I/h <28000 I/h <4.000 I/h <7.000 I/h
Max. drop speed of bulk material 100 - 4.000 mm/sec
Max. permissible bulk material temperature 80 °C
Properties of the bulk material flowable

Sensitivity Adjustable Maximum (no product effect assumed)
At the center of detector [Ferrous/Fe/Ne/VA-bullet in app. 0.5/0.7/0.8 app. 0.7/0.9/1.0 app. 0.8/1.1/1.3 app. 1.2/1.6/1.8
Sensitivity is adjustable by LC display-multifunction panel
Mode of operation of evaluation electronics digital
Mode of operation of ring detector Transmitter - Receiver

Connection Data
Operartional voltage 230 V/50 Hz (others at inquiry)
Compressed air supply 4-6 bar, filtered, free of water and oil
Power Input <40 VA
3 m Connecting cable L1/N/PE*1.5 mm2

For more technical information takes it please the chapter accessories under the point M-Pulse control electronic.

Description M-Pulse GF 250 M-Pulse GF 300 M-Pulse GF 350 M-Pulse GF 400
Mechanical Details        
Installation height (with reject flap) 935 [1395] mm 1100 [1605] mm 1265 [1935] mm 1350 mm
Width/Depth 685/800 mm 800/940 mm 880/1020 mm 950/1090 mm
Nominal width 250 mm 300 mm 350 mm 400 mm
Material of Installing frames Stainless steel
Material of reject device Stainless steel
Material of ring Stainless steel
Material of protection tube (optional) Teflon, Polyethylene, POM, Glas
Protection class of detector IP 65

Application Conditions
Material throughput depends on the properties of material and complete conveyor system <115000 I/h <165000 I/h <225000 I/h <290000 I/h
Max. drop height of the bulk material 100 - 4.000 mm/sec
Max. permissible temperature 80 °C
Max. permissible device temperature -0 °C...50 °C
Properties of the bulk material flowable

Sensitivity Adjustable Maximum (no product effect assumed)
At the center of detector [Ferrous/Fe/Ne/VA-bullet in app. 1.5/1.2/2.3 app. 1.9/2.4/3.0 app. 2.2/2.7/3.3 app. 2.4/2.9/3.6
Sensitivity is adjustable by LC display-multifunction panel
Mode of operation pc board digital
Mode of operation of ring detector Transmitter - Receiver
Connection Data
Operartional voltage 230 V/50 Hz (others at inquiry)
Compressed air supply 4 - 6 bar, filtered, free of water and oil
Power consumption <40 VA
3 m Connecting cable L1/N/PE*1.5 mm2

For more technical information takes it please the chapter accessories under the point M-Pulse control electronic.


Contact us today: - Tel: 973.227.0700


We accept the following major credit cards:

Plastic Process Equipment


Plastic Process Equipment

23 Spielman Road, Fairfield, New Jersey, USA, 07004-6155
Tel: 973.227.0700 ~ Fax: 973.227.7307 ~ Email: