Digital Compressed Air Metal Separators

There are two digital compressed air metal separators with detector coil diameters ranging from 50 to 70 mm.

Special Features We Also Offer:
  • A High level of metal detection sensitivity.
  • Compact and solid design.
  • Simple commissioning and reliable operation.
  • Used for temperatures up to 130° C [optional]
  • Superior and powerful precision stream of air as systems with venturi effect.
  • Superior customer service.
  • Short delivery times for spare components, wear parts and new drives.
  • Expert assistance during planning and consultation on site by one of our sales representatives.
  • Workout of customized solutions for the highest sensitivity.
  • Excellent quality and more than 35 years of age experience.
  • Maintenance service on factory mostly within one week
  • First class reference assests.
  • A wide range products with many applications.

Technical Indication
Please
send us some pictures of your machine where you will install the unit. We check if the MESEP® compact digital is suitable in your application. A reliable separation of metal with an air stream is only possible, when all technical requirements will comply. Ask for our help and advice.

Model Number 50 70
Mechanical Details  
Installation height [without adapter plates] 225 mm
Clear width inside protection tube 50 mm 70 mm
Free diameter of the detection coil 55 mm 75 mm
Weight of device (approx) 14 kg
Load bearing capacity of the housing <150 kg
Flap Material Aluminum
Housing Material Aluminum
Protection Tube Material [optional] Pnenolic resin
Housing fractional coated in RAL 5005
Protection class [higher available on request] IP 50

Application Conditions
Material throughput depends on the properties of material and complete conveyor system 27 - 2000 I/h* 43 - 3200 I/h*
Max. sagging speed of the bulk material 3 mm/sec
Max. permissible temperature of bulk material 80 °C
Max. temperature of the housing 0 - 60 °C
Properties of the bulk material dry and flowable
   

Sensitivity Adjustable Maximal (no product effect assumed)
At the edge of detector [Ferrous/Alu/Stainless steel ball in mm] app. 0.5/0.8/1.0 app. 0.7/1.0/1.2
Sensitivity is adjustable by Multifunctional panel
Mode of operation of evaluation electronics digital
Mode of operation of ring detector Transmitter - Receiver

Main Connections
Operartional voltage 85 - 284 V/4 - 440 Hz or 110 - 340 VDC
Compressed air supply 4 - 6 bar, filtered, free of water and oil
Power consumption <40 VA
3 m Connecting cable L1/N/PE*1.5 mm2

Inputs Test button/Emptying of the equipment
Output signals  
Transistor output Metal Detection 24 V/20 mA
Power supply for periphery 24 V/100 mA
Metal Detection/breakdown - power supply 2 * 250 V/5A

Optional Test button
Flap in position not-good, if air pressure fails or power supply fails [Option No. 40]; protection class IP 54 [Option No. 54]


A Metal Separator on an Arburg injection molding machine.

For more technical information takes it please the chapter accessories under the point M-Pulse control electronic.


Contact us today: - Tel: 973.227.0700


We accept the following major credit cards:

Plastic Process Equipment


Plastic Process Equipment

23 Spielman Road, Fairfield, New Jersey, USA, 07004-6155
Tel: 973.227.0700 ~ Fax: 973.227.7307 ~ Email: