M-Pulse GF Compact Metal Separators

There are three compact M-Pulse GF metal separators with detector coil diameters ranging from 100 to 120 and 150 mm.

Model Name M-Pulse GF compact 100 M-Pulse GF compact 120 M-Pulse GF compact 150
Mechanical Details      
Installation height (with reject flap) 200 [450] mm 250 [530] mm 250 [600] mm
Width/Depth 318/450 mm 338/450 mm 400/502 mm
Nominal width 100 mm 120 mm 150 mm
Material of Installing frames Stainless steel
Material of reject device Stainless steel
Material of ring Stainless steel
Material of protection tube (optional) Teflon, Polyethylene, POM, Glas
Protection class of detector IP 65

Application Conditions
Material throughput depends on the properties of material and complete conveyor system <20000 I/h <28000 I/h <43000 I/h
Max. drop speed of bulk material 100 - 4000 mm/sec
Max. permissible bulk material temperature 80 °C
Max. permissible device temperature -0 °C... +50 °C
Properties of the bulk material flowable

Sensitivity Adjustable Maximum (no product effect assumed)
At the center of detector [Ferrous/Fe/Ne/VA-bullet in app. 0.7/1.0/1.1 app. 1.0/1.2/1.4 app. 0.8/1.1/1.3
Sensitivity is adjustable by LC-display-multifunction panel
Mode of operation of evaluation electronics digital
Mode of operation of ring detector Transmitter - Receiver

Connection Data
Operartional voltage 230 V/50 Hz (others at inquiry)
Compressed air supply 4-6 bar, filtered, free of water and oil
Power Input <40 VA
3 m Connecting cable L1/N/PE*1.5 mm2

For more technical information takes it please the chapter accessories under the point M-Pulse control electronic.

Description M-Pulse GF compact 200 M-Pulse GF compact 250 M-Pulse GF compact 300
Mechanical Details
Installation height (with reject flap) 300 [910] mm 390 [1050] mm 390 [1095] mm
Width/Depth 508/615 mm 641/800 mm 800/940 mm
Nominal width 200 mm 250 mm 300 mm
Material of Installing frames Stainless steel
Material of reject device Stainless steel
Material of ring Stainless steel
Material of protection tube (optional) Teflon, Polyethylene, POM, Glas
Protection class of detector IP 65

Application Conditions
Material throughput depends on the properties of material and complete conveyor system <74000 I/h* <115000 I/h* <165000 I/h*
Max. drop speed of bulk material 100 - 4000 mm/sec
Max. permissible bulk material temperature 80 °C
Max. permissible device temperature -10 °C... +50 °C
Properties of the bulk material flowable

Sensitivity Adjustable Maximum (no product effect assumed)
At the center of detector [Ferrous/Fe/Ne/VA-bullet in app. 1.6/2.2/2.4 app. 2.0/2.7/3.1 app. 2.6/3.2/4.1
Sensitivity is adjustable by LC-display-multifunction panel
Mode of operation of evaluation electronics digital
Mode of operation of ring detector Transmitter - Receiver

Connection Data
Operartional voltage 85-264 V/50-60 Hz
Compressed air supply 4-6 bar, filtered, free of water and oil
Power Input <100 VA
3 m Connecting cable L1/N/PE*1.5 mm2

For more technical information takes it please the chapter accessories under the point M-Pulse control electronic.


Metal detector to assay free falling bulk materials.

Ød[mm] A mm] B [mm] C [mm] D [mm] MATERIAL FLOW I/h SENSITIVITY
FE ALU VA
100 450 200 450 318 20000 0.7 1.0 1.1
120 530 250 450 338 28000 1.0 1.2 1.4
150 600 250 502 400 43000 0.8 1.1 1.3
200 910 300 615 508 74000 1.6 2.2 2.4
250 1050 390 800 641 115000 2.0 2.7 3.1
300 1095 390 940 800 165000 2.6 3.2 4.1

Contact us today: - Tel: 973.227.0700


We accept the following major credit cards:

Plastic Process Equipment


Plastic Process Equipment

23 Spielman Road, Fairfield, New Jersey, USA, 07004-6155
Tel: 973.227.0700 ~ Fax: 973.227.7307 ~ Email: