M-Pulse Compressed Air Metal Separators
There are three M-Pulse compressed air metal separators with detector coil diameters ranging from 25, 50 to 70 mm.
|Special Features||We Also Offer:|
Please send us some pictures of your machine where you will install the unit. We check to see if the M-Pulse compact is suitable for your application. A reliable separation of metal with an air stream is only possible, when all technical requirements will comply. Ask for our help and advice.
|Installation height (with reject flap)||225 mm|
|Clear width inside protection tube||20 mm||45 mm||65 mm|
|Free diameter of the detection coil||25 mm||50 mm||70 mm|
|Weight of device (approx)||14 kg|
|Load bearing capacity of the housing||< 150 kg|
|Protection Tube Material (optional)||Phenolic resin, ceramics, glass|
|Housing fractional coated in||RAL 5005|
|Protection class [higher available on request]||IP 50|
|Material throughput depends on the properties of material and complete conveyor system||<14 - 600 I/h*||< 27 - 2000 I/h*||<43 - 3200 I/h*|
|Max. sagging speed of bulk material||0 - 600 mm/sec|
|Max. permissible bulk material temperature||80 °C|
|Max. permissible device temperature||0 - 60 °C|
|Properties of the bulk material||dry and flowable|
|Sensitivity Adjustable Maximal||(no product effect assumed)|
|At the center of detector [Ferrous/Fe/Ne/VA-bullet in||app. 0.05/0.07/0.1||app. 0.25/0.35/0.4||app. 0.35/0.5/0.6|
|Sensitivity is adjustable by||LC-display-multifunction panel|
|Mode of operation of evaluation electronics||digital|
|Mode of operation of ring detector||Transmitter - Receiver|
|Operartional voltage||230 V/50 Hz (others at inquiry)|
|Compressed air supply||4-6 bar, filtered, free of water and oil|
|Power Input||<40 VA|
|3 m Connecting cable||L1/N/PE*1.5 mm2|
For more technical information takes it please the chapter accessories under the point M-Pulse control electronic.
Above is a Metal Separator on an Arburg injection molding machine.